F250/F350 4WD 3 Inch Elite Lift Kit with Elka 2.5 Remote Reservoir Shocks

$11,680.00 inc. GST

F250/F350 4WD 3 Inch Elite Lift Kit with Elka 2.5 Remote Reservoir Shocks , Elevate your vehicle\’s style, functionality, and performance with the Cognito Uniball SM Series Upper Control Arms. These arms correct the uniball angle for lifted and leveled applications, enhancing allowable droop travel for an improved ride quality.

Description

Unleashing the power of  lift kits for FORD F250/F350 2021-2023

F250/F350 4WD  with Elka 2.5 Remote Reservoir Shocks

We’ve carefully bundled everything you require into our leveling kit tailored for your F-250/F-350 4WD, featuring the Cognito 3″ Elite Lift Kit coupled with Elka 2.5 Remote Reservoir Shocks.

Rest assured, there’s no need for guesswork here. Cognito components are proudly engineered, manufactured, and assembled in the USA.

Elevate your vehicle’s style, functionality, and performance with the Cognito Uniball SM Series Upper Control Arms. These arms correct the uniball angle for lifted and leveled applications, enhancing allowable droop travel for an improved ride quality.

Experience the difference with Elka 2.5 shocks, equipped with Dual Speed Compression adjustment for reduced vibrations and significant noise reduction in the cabin. These shocks are optimized for each truck and setup, providing a smoother ride, stable handling, reduced diving when cornering or braking, minimized rear-end bucking and lifting, and increased damping and spring rate for enhanced handling during towing or heavy loads.

3 Inch Elite Lift Kit with Elka Features:

  • Yields 3 Inches of front lift and 1 Inch rear lift
  • Elka 2.5 Remote Reservoir Shocks with Dual Speed Adjusters
  • Direct bolt-on installation
  • Levels the vehicle front to rear
  • Maintains Adequate Droop Travel for Superior Ride Quality
  • Dual-rate coil springs
  • HD Extended-Length Track Bar
  • 1 Inch Bump Stop Spacer Kit
  • 6-hour DIY Install time
  • Made in the USA

 

 

Please contact us to find out about more information that applies to this product.

Follow on Facebook: 

NOTICE OF DISCLAIMERLift and Levelling Kits
Not all lift kits are legal to install on your vehicle. It is the customers’ responsibility to check regulations pertaining to their vehicle and warranty coverage, prior to purchasing and the installation of all lift and levelling kits.
Lift and levelling kits may interfere with vehicle functions including but not limited to stability control, auto levelling functions and chassis clearance issues.
The bigger the lift or levelling kit that is fitted increases the chances of the factory CV joints and ball joints wearing out prematurely. High articulation CV joints are available to minimize this issue if required.
In certain circumstances the factory inner CV joint boots may slip off the end of the shaft due to the change in the angle after a front lift has been fitted. In most circumstances fitting an improved CV boot clamp to the CV boot will assist with this matter.
Ball joints on the upper control arms need to be lubricated after installation and re-greased at each service interval. Without adequate grease they will wear out prematurely and will need to be replaced. It is the customers responsibility to ensure that the ball joints are always kept greased.
It is paramount that all lift kit components that have been installed, be re-torqued after the first 100 kms to adjust for any settling of the suspension components; then rechecked at each service interval to ensure that everything is correctly torqued. This is the customers responsibility as loose components can cause damage to your vehicle.
It is suggested that the customer does their own research prior to purchasing and requesting the installation of lift and levelling kits to their vehicle.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.